|
|
|
|
|
 |
|
|
|
|
BSOD? That the case is it and why they. |
|
|
|
|
|
| BSOD? That the case is it and why they. |
|
|
|
| Why a habit my computer beginning? Why I receive the "dark blue" screen? |
| |
|
It is a lot of BSOD ` s it is caused defective ram/underpowered psu ` s/overheating/overclocking/dust and ruins. Is a little prophetic, which you can make to solve your problem, at first carries out full disk check.
Click the beginning/run both print chkdsk/f/r and press key ENTER. Follow onscreen causes and to reboot. Windows will check up your store on hard disks on problems.
Depending on the size of your store on hard disks it can occupy some time. Other thing which you can try, is the First, to switch off your computer and to disconnect it from the main power and to separate all cables, then press the power button completely to exhaust the power then open it.
Clean all dust, a dirt all that a material, especially from heatsinks and admirers. Mozhenie compressed air it is very useful for this part. Then, take out the sticks of a jack and softly clean gold contacts to an elastic band.
Blow off ostavlenie on a jack, also blow off any dust which can be in jack cracks. Repeatedly insert a jack. Restart the system and vidte, whether there is it steadier. You could also wish to try to place a jack in a various dim crack. Check up the system that it has overheated. The free program of the Everest is useful for this purpose.
Check up, that you psu makes the sufficient power for your system. Especially, check up, that is many enough amps on a rail on 12 vt. underpowered psu can cause all kinds of casual failures. Check up, that you pagefile is perfectly in order.
Make the following.
To make so do, as the accompanied right clicks my computer, and chooses properties, and then the advanced account at work, click adjustment parametres.
Press the advanced account, and then on change the button presses the customs button of the size, and clicks, the initial size box and do the size of a file of 0 pages.
Click in the maximum box of the size, and force the size of a file of 0 pages to click a set now. Now everything, that you should make, is reboot your car. After your system has restarted, operates defrag.
As soon as defrag has ended, come back to pagefile to adjustment parametres above, and press the change button. For the initial letter, and a maximum pagefile the size do it by 1.5 times which the quantity of a jack has yours.
Excluding..., if you have 512 MB of a jack, establishes a page file in 768 MB. After the made press the set button, and reboot your system. You have now absolutely new file of page. |
|
| About the Author |
|
http://www.unitedtechsco.com Incorporated Computer Service of Repair Techs
Article source: http://www. ArticlesTake.com |
|
|
|
| |
|
|
|
|
| |
|
|
| |
|
|
|
|
|
|
