|
|
|
|
|
 |
|
|
|
|
The understanding, that anti-feature of a dust is in digital chambers SLR |
|
|
|
|
|
| The understanding, that anti-feature of a dust is in digital chambers SLR |
|
|
|
| Digital chambers use the gauge known as CCD to transform easy energy in piksely. The dust which collects on CCD, can lead black pikselam or to lacks of a photo as it blocks easy energy from parts CCD making attacks. We will be run through some decisions to eliminate a dust on CCD. |
| |
|
Digital chambers use the gauge known as CCD to transform easy energy in piksely. The dust which collects on CCD, can lead black pikselam or to lacks of a photo as it blocks easy energy from parts CCD making attacks. We will be run through some decisions to eliminate a dust on CCD. Gauge CCD is located behind the reflected mirror in digital chamber SLR. Taking a photo the mirror moves and allows light getting through lenses, amazes CCD which then transforms light abreast pikselov, including a digital photo.
The most part of time the chamber is closed, and the dust cannot get through it. Some chambers could not be completely sealed against the dust leading to penetration of a dust it a body of the chamber even with established lenses. However in most cases the majority podverganija a dust - when lenses are replaced. During that time the chamber is opened and exposed to air and a dust. To minimise a dust on CCD make sure, that you minimise time in which the chamber is opened and exposed to air. For example, when changing lenses make sure, that you are in rather pure environment and that you have second convenient lenses. Try to avoid to change a lens when in windy or dusty environment. Never take lenses from the chamber and leave a body opened and exposed – or establish other lenses or place the press in a body to prevent dust penetration. Even with cautious care the dust finally will find the way to the chamber and on CCD. There are some ways to get rid of that dust. Depending on your chamber some of them will not be accessible to you.
Active removal of a dust: the newest chambers SLR include some kind of the active mechanism of removal of a dust. Most the general opposes dust vibrations. This decision deletes a dust from the gauge, vibrating it in high frequency for a short time interval. Vibrating CCD will lead to a dust decreasing CCD or “dancing its way” from CCD. At various times various chambers turn dust anti-vibration. Some chambers turn it on each time when the chamber is included, some each time when it is switched off also some both when the chamber it is included and when it is switched off. Other chambers periodically include vibration or allow the user to turn it manually. Chambers which include the stabilizer of the image based in movement of the gauge usually also, include dust anti-vibration as they already include a mechanical part: the engine which can move the gauge and thus dust anti-vibration, software addition is simple.
Passive prevention of a dust: the Passive decision which tries to eliminate some of the reasons for a dust collecting on CCD. The main reason, that a drawn game dust to CCD - an electrostatic charge. Some manufacturers add an antistatic covering on external layer CCD (usually, it it is a low layer of the filter of pass). Doing, that CCD, less possibly, will involve a dust because of its electrostatic charge.
Manual removal of a dust: Manual removal - simply way for you manually to clean CCD. When inserted the chamber moves a mirror to a manual way of removal of a dust and holds it in position where CCD it is exposed and achievable. Then you can try to blow off a dust from CCD for example at use vozduhoduvki. You could use also a special fabric to clean CCD, but to be very cautious, doing it and to make sure, that you read instructions of manufacturers for this purpose how to clean CCD, not damaging it. If you are not assured how to clean CCD, it is better not to do clearing attempt as it can be easily damaged. All methods of removal of a dust have restrictions. A sticky dust or other material or it is very difficult to clean or impossible to clean.
Dust elimination completely from CCD is impossible, but applying care and the mentioned features the most part of a dust which leads to photo lacks, can be avoided. For the casual photographer the built in active or passive anti-features of a dust should be enough, and manual clearing will not be necessary. |
|
| About the Author |
|
This article can be republished, only if a resource box, including backlink is included. Ziv Haparnas writes about a science and the technician. Ziv Haparnas - the expert in technology. Find more on the photo press, and the photo is on printrates.com - a place about http://www.printrates.com the digital press of a photo
Article source: http://www. ArticlesTake.com/author-ziv-h.-694.html |
|
|
|
| |
|
|
|
|
| |
|
|
| |
|
|
|
|
|
|
